U6DLE / ZSDLE Usage Instructions :

User avatar
Spildit
Posts: 1554
Joined: Sat Apr 06, 2013 4:59 pm
Location: Portugal
Contact:

U6DLE / ZSDLE Usage Instructions :

Postby Spildit » Sun May 18, 2014 6:03 pm

Code: Select all

#----------------------------------------------------------
#    _ _ _   [Dos16] u6dle v1.11 (Jan 17 2001)
#   / / (_)
#  _\ \ \    (c)1999
# (_)_/_/    R&D Firmware Department
#            Seagate Science Park, Singapore
#----------------------------------------------------------
# This utility has 4 modes of operation
#   1a. Serial Port Download/Upload firmware code into/from the FlashROM
#   1b. Serial Port DownLoad/Upload reserved-zone (RSM) files
#   2 . Ditto as #1 except via the AT Interface
#   3 . Serial Port Failure Analysis Debug Logging
#   4 . Serial Port Terminal Mode
# Supported Drv: u8, v8, v8p, u10
#----------------------------------------------------------

Usage:
    u6dle [options] [BinaryFileName]

Examples: (DL=DownLoad, UL=UpLoad)
    u6dle /a u8                  ; (AT) DL flash and overlay files
    u6dle /a u8.bin              ; (AT) DL single file u8.bin
    u6dle /c1 /s576 u8           ; (COM) DL all u8 files thru COM1 at 57600 bps
    u6dle /c1 rwf.bin            ; (COM) DL rwf.bin thru COM1
    u6dle /c1 /u=10 u8file.bin   ; (COM) UL RSM file with key 10h
    u6dle /c1 /t                 ; (COM) Goto terminal mode on COM1
    u6dle /ts /tl=my.log /ti=60  ; (COM) 60 sec timestamp, save to my.log
    u6dle /c1 /K congen.bin      ; (COM) DL congen file

Options:

    /h /?    Show this help screen
    /hk      Show the list of supported RSM files and file-keys

    Mode 1: Serial Port Downloads/Uploads
    -------------------------------------
    /r       Download Key RSM files.(def.bin, res.bin, rwf.bin)
    /z       Don't spin down before DLE
    /fXXXX,YYYY    XXXX=ASW, YYYY=SavedASW  (4-digit hex)
    /K       Download Congen files

    Mode 2: AT Interface Downloads/Uploads
    --------------------------------------
    /a       Transfer via AT interface
    /sec     Secondary channel                           [default = Primary]
    /slave   Slave drive                                 [default = Master]
    /biosdrv=n   BIOS Drive number; 0 = 1st hard drive   [default = 0]

                    [Requires BIOS INT13 Extensions v3.0 or later]
                    [Do not use this together with the /sec or /slave options]

    Mode 3: Serial Port Failure Analysis Debug Logging
    --------------------------------------------------
    /d       Issue online cmds for FA; output written to FA.LOG

    Mode 4: Serial Port Terminal Mode
    ---------------------------------
    /t       Terminal mode
    /ts      Terminal mode with timestamp
    /tl=F    Log to file F
    /ti=N    Timestamp after every N seconds of Idleness
                 [valid = 1 to 300; default = 120]


    For Modes 1 and 4
    -----------------
    /cN      Serial port; N = 1 to 4                     [default = COM2]
    /sN      Baudrate / 100; N = 96, 192, 384, 576, 1152
                 Mode 1: Default = 115200 bps for file transfers;
                         Will auto-detect initial baudrate
                 Mode 4: Default =  9600 bps for all I/O; no auto-detection

    For Modes 1 and 2
    -----------------
    /cp=X    RSM file copy#; X = 0 to 3                  [default = copy #0]
    /hd=Y    RSM file head#; Y = 0 to 3                  [default = head #0]
    /p       Download RSM file [No key reqd] (key taken from bin file itself)
    /p=X,Y   Download RSM file to drive; X = FileKey = 1 to 10h
                                         Y = Features; 0: normal download
    /u=X     Upload RSM file from drive; X = FileKey = 1 to 11h
                                         X = 0 (Upload FlashROM image)
    /u       Upload all RSM files
    /su      Upgrade the bin file only. Dflt: Upgrade bin file with overlays
    /thr     Download code, thrash the RomHeadMap. Dflt: RomHeadMap preserved
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)

Return to “U6DLE / ZSDLE”

Who is online

Users browsing this forum: No registered users and 1 guest